BLRWD - WHITE SEMI GLOSS LATEX ENAMEL 922B
- MSDS: BLRWD
- Manufacturer: FARWEST PAINT MANUFACTURING CO
- Product Name: WHITE SEMI GLOSS LATEX ENAMEL 922B
- National Stock Number: 8010-00N021237
Product Identification
Product ID:WHITE SEMI GLOSS LATEX ENAMEL 922B
MSDS Date:10/24/1989
FSC:8010
NIIN:00N021237
MSDS Number: BLRWD
Responsible Party
TUKWILA, WA 98168
US
Emergency Phone: 206-941-1619
Info Phone: 206-244-8844
Cage: 2F266
Contractor
Telephone: 206-244-8844
Cage: 6F266
Ingredients
ETHYLENE GLYCOL (SARA III)
CAS: 107-21-1
RTECS: KW2975000
Fraction By Weight: <5%
OSHA PEL C 50 PPM
ACGIH TLV: C 50 PPM,VAPOR; 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
0.10 @ 68F
CAS: 111-46-6
RTECS: ID5950000
Fraction By Weight: <5%
OSHA PEL 100 PPM (MFR)
ACGIH TLV: 100 PPM (MFR)
ADDITIVES/SURFACTANTS
Fraction By Weight: <2%
PHENYLMERCURIC ACETATE (SARA III)
CAS: 62-38-4
RTECS: OV6475000
Fraction By Weight: <0.25%
OSHA PEL 0.1 MG HG/M3;CEIL;S
ACGIH TLV: 0.01 MG HG/M3; 9192
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONE EXPECTED.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:SKIN: WASH THOROUGHLY WITH SOAP AND WATER. EYES: WASH
THOROUGHLY WITH WATER FOR AT LEAST 15 MINUTES. INGEST: CALL MD.
INHAL: REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O2/ARTIFICIAL
RESPIRATION) (FP N).
Fire Fighting
Flash Point Method:TCC
Extinguishing Media:FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WILL NOT BURN.
Accidental Release
Spill Release Procedures:DAM UP AREA WITH ABSORBENT MATERIAL SUCH AS
SAWDUST OR DIATOMACEOUS EARTH.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID TEMPS BELOW 40F. KEEP FROM
FREEZING. STORE CONTAINERS WITH LIDS TIGHTLY CLOSED. KEEP AWAY FROM
MATERIALS WHICH MAY REACT WITH WATER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NONE REQUIRED. NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:MECHANICAL OR LOCAL EXHAUST.
Protective Gloves:NONE REQUIRED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:KEEP WORK AREA CLEAN & FREE FROM SPILLS &
LEAKS. ALWAYS WASH HANDS THORO WITH SOAP & WATER BEFORE HNDLG FOOD
& DRINK.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:SEE INGRED
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:INFINITE
Appearance and Odor:WHITE THIXOTROPIC LIQUID WITH SLIGHT TO NO ODOR.
Percent Volatiles by Volume:<1
Stability
Stability Indicator/Materials to Avoid:YES
MATERIALS WHICH MAY REACT WITH WATER.
Stability Condition to Avoid:TEMPERATURES BELOW 40F. KEEP FROM
FREEZING.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:DISPOSE OF ACCORDING TO LOCAL, STATE AND FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.